Free US delivery · duties paid · 14-day returns
Home / Bulbs and dimmers / GU10 halogen bulb on a trailing-edge dimmer glows when switched off

GU10 halogen bulb on a trailing-edge dimmer glows when switched off

A glow when switched off comes from one of three causes: a small current the dimmer lets through when off (common with electronic dimmers), voltage induced from nearby cables, or a fault such as the switch cutting the neutral instead of the live. A filament needs far more current than an LED to glow, so with filament bulbs a fault is the likelier cause — have it checked. There's no standard minimum load: use the minimum and maximum printed on your dimmer — with 35 W GU10 bulbs a 10 W minimum needs 1, a 40 W minimum 2. The bulb must be marked dimmable.

Typical bulb
35 Whalogen GU10
Bulbs for a 10 W printed minimum
1the minimum printed on your dimmer decides
Bulbs for a 40 W printed minimum
2

Worked out, not measured · How we work it out

Top picks

Best fit first

Sorisaria Wall Sconce

$146
GU10 · dimmable · W 12 × H 12.5 cm · $109 per light
MetalArrives by 5 Dec

Kaldor Wall Sconce

$146
GU10 · dimmable · W 13 × H 9 cm · $109 per light
MetalArrives by 5 Dec

Lights for this

Filter & sort (0)
8 lights

Sorisaria Wall Sconce

$146
GU10 · dimmable · W 12 × H 12.5 cm · $109 per light
MetalArrives by 5 Dec

Kaldor Wall Sconce

$146
GU10 · dimmable · W 13 × H 9 cm · $109 per light
MetalArrives by 5 Dec

Beaufort Wall Sconce

$189
GU10 · dimmable · W 82 × H 8 cm · 7 W stated maximum · $141 per light
MetalArrives by 5 Dec

Orelelaria Wall Sconce

$189
GU10 · dimmable · W 22 × H 11.5 cm · $141 per light
MetalArrives by 5 Dec

Avenanira Pendant Light

$454
GU10 · dimmable · L 33.5 × W 7.5 × H 100 cm · $340 per light
MetalArrives by 5 Dec

The numbers for this situation

  • Typical bulb35 Whalogen GU10
  • Bulbs for a 10 W printed minimum1the minimum printed on your dimmer decides
  • Bulbs for a 40 W printed minimum2
  • Our GU10 lights stated dimmable8
  • Share of our GU10 lights stated dimmable6 %

Worked out, not measured

All the numbers

Minimum printed on the dimmer (W)Bulbs neededLoad (W)
0135
10135
20135
40270

Good to know

A glow when switched off comes from one of three causes: a small current the dimmer lets through when off (common with electronic dimmers), voltage induced from nearby cables, or a fault such as the switch cutting the neutral instead of the live. A filament needs far more current than an LED to glow, so with filament bulbs a fault is the likelier cause — have it checked.

How we work it out & FAQ

Where these numbers come from
  • Bulbs needed = the minimum printed on the dimmer ÷ the bulb's watts, rounded up; typical bulb wattages are assumptions. Checked against 9 matching lights in our catalogue snapshot of 2026-09-27; 8 can be bought now. Same sums on every page, release families-2026-09-29.

Related