Free US delivery · duties paid · 14-day returns

How to choose a G9 LED replacement bulb

Choose a G9 LED replacement that fits the holder and shade, meets the fitting's permitted load and works with its controls. Compare the bulb's actual consumption and lumens when replacing halogen.

By LIRRA · Updated

Desk research using the frozen catalogue and the attributed source extracts; no hands-on testing.

Measure the fitting and capsule

Start with the fitting label and the old bulb markings. Our capsule glossary explains the connector. Keep the lamp reference and permitted bulb requirements beside your measurements, including any restrictions for an enclosed shade. Isolate the light and let the old bulb cool before handling it.

Measure the space inside the shade and its insertion opening. The first linked capsule example is 52 mm long and 16 mm in diameter. Compare the actual replacement drawing with your lamp and leave the clearances required by its instructions. Capsule specification.

Include the space needed to refit the shade and reach the holder. Photograph any retaining parts before removing them. For a fitting with several capsules, compare access at each position. Keep a damaged holder or uncertain installation for assessment before choosing replacement bulbs.

For a lamp with a removable glass shade, keep the retaining pieces together while comparing the available space. Make a sketch if the opening is narrower than the body of the shade. Include the space needed to approach the holder using the intended insertion method. Photograph the lamp label separately so its requirements remain easy to read when the fitting has been reassembled. Use those measurements to rule out capsules that occupy too much space before comparing brightness or colour.

Read the fitting's permitted load

Our range includes 2009 models offering this capsule fitting. Choose the electrical version that matches your requirement, then keep its permitted bulb type and load beside the replacement reference. The linked models are fittings to browse when choosing a whole light.

Across 291 fittings with a stated maximum load, the median maximum is 40 W. A maximum load belongs to the fitting. Use the actual consumption of the bulb you buy when comparing the electrical load and calculating its running cost.

For an existing lamp, begin with that lamp's instructions. Keep the permitted load together with the number of holders and any enclosure conditions. A chandelier and a compact wall light can need different body clearances and access even when their bulbs share the same connector.

Compare named halogen-to-LED examples

The table gives the three linked replacement examples. Compare the old-lamp equivalent for orientation, the actual LED consumption for power and the lumen rating for output. Each row describes a particular capsule. Choose the drawing and control specification as carefully as the output when matching it to your lamp.

The examples are detailed in the first specification, the middle specification and the last specification. Keep the chosen product reference beside your fitting note. Compare a proposed replacement with the old bulb's output when you want a similar amount of light.

Compare named halogen-to-LED examples
Manufacturer old-lamp equivalent Actual LED consumption Stated output Dimming
30 W 2.6 W 320 lm Non-dimmable
40 W 3.8 W 470 lm Non-dimmable
48 W 4.8 W 600 lm Non-dimmable

Calculate electricity use with actual LED watts

The three linked capsule examples use 2.6–4.8 W and give 320–600 lm. Choose among them by the output, dimensions and fitting requirements you need. Use the actual wattage of the particular bulb for the running-cost calculation, retaining the model reference so later replacements can be compared consistently.

Multiply the actual bulb wattage by the hours you use it to get watt-hours. Convert that energy to kilowatt-hours and multiply by your electricity tariff. For a fitting with several bulbs, add their actual consumption. Keep the planned operating hours visible when comparing the result with another room light.

Choose output around the job and position. Our lumen glossary explains the unit used in the table. A replacement for a decorative wall light should suit the seated view, while a lamp used for a task also needs its light positioned towards the working surface.

Choose the light you want through the shade

Write down what you want to change about the old bulb: more light, a different white appearance or a more comfortable view of the shade. Compare the lumen ratings for output, then look at the colour and how the shade directs the light. Keep the lamp's location in the decision.

For colour, choose an explicit Kelvin value. The warm-white glossary, neutral-white capsule page and cool-daylight capsule page explain choices for the room appearance. Match those choices to a replacement that also meets the lamp's physical and electrical requirements.

For several capsules, compare per-bulb output with per-bulb output. Keep a complete-light figure with the whole fitting. Choose matching colour and output for a group you want to look consistent, and retain the successful bulb reference for future orders. Include the view from each seat where the fitting is visible.

Try the view from the places where you spend time in the room. A bulb visible above an open shade can have a different visual presence from a capsule hidden by an opaque cover. Include the background wall and nearby lamps when choosing the white appearance. If you are replacing a group, decide whether you want to keep the existing room effect or change the whole group together. Put that intention in the same note as the output and colour, so the replacement is chosen for the result you actually want.

Match the dimmer and bulb

The capsule examples in the table are non-dimmable. For a dimmed circuit, choose a dimmable capsule and use the dimmer maker's compatibility instructions for the exact combination. Keep the fitting, dimmer and bulb references together. Capsule control specification.

The dimmable glossary explains the term. Give the exact references to an electrician or seller when asking about a combination. Include any controls already built into the lamp and the electrical version you are using. Keep the resulting instructions with the lamp details.

Confirm the combination before ordering replacements for a whole chandelier. Save the packaging and specification for the successful capsule. If the fitting behaves unexpectedly after a change, stop using the uncertain combination and have the cause assessed. Complete the control decision before moving on to the preferred colour or finish.

Keep a shopping note for the whole fitting

Record the fitting model, connector, permitted bulb type, load and enclosure requirements. Add the shade measurements, desired output, colour and compatible control combination. Follow that order when comparing alternatives so each candidate fits the lamp and the job before you choose by appearance.

For a wall light, sit in the nearby chair or bed and consider whether the bulb will be directly visible. Compare how the shade fits around the proposed capsule. For a multi-arm light, leave maintenance access to every holder, including the ones nearest the ceiling or wall.

The linked LIRRA models are complete fittings using this cap. Use them when choosing a whole lamp, and use the named bulb specifications when choosing a replacement capsule. Check the exact fitting version and included bulbs on the product page before ordering. Keep the successful references for the next replacement.

For repeat orders, retain a readable copy of the manufacturer's specification as well as the packaging. Write down which lamp uses the capsule and whether the light is normally dimmed. Include the physical dimensions that worked under the shade, especially where the opening was difficult to measure. When a later replacement has a different body shape, compare its drawing afresh rather than ordering solely by the old equivalent-wattage label.

Plan maintenance when choosing a whole new fitting. Consider how each shade is removed, where the bulb sits and whether the position leaves room to reach every holder. For a bedside wall light, include the view from the pillow and access around nearby furniture. For a larger decorative light, keep the fitting instructions in the household file so its replacement requirements stay available after installation.

Questions and answers

How should I choose an LED replacement?

Match the fitting instructions, capsule dimensions, actual consumption and control compatibility, then choose the output and colour.

What does the middle Integral example use?

It uses 3.8 W and gives 470 lm; its old-lamp equivalent is 40 W.

How many matching fitting models are in your range?

Our range includes 2009 models offering this capsule fitting.

What should I measure inside the shade?

The available body space, insertion opening and clearances required by the fitting.

Are the table examples dimmable?

The three linked capsule examples in the table are non-dimmable.

How do I calculate electricity cost?

Multiply actual wattage by hours of use, convert watt-hours to kilowatt-hours and multiply by your tariff.

Contemporary Minimalist Elegant Glass Cylinder Wall Sconce
Contemporary Minimalist Elegant Glass Cylinder Wall Sconce — catalogue example, not a test result.

Evidence and method

Distinct work_ids from both frozen JSONL inputs via tools/article_stats.py; explicit variant sockets, separate sellable subset and fixture limits; replacement figures attributed to the linked manufacturer specifications, never inferred from fixtures.

  • Capsule replacement: lower output
  • Capsule replacement: middle output
  • Capsule replacement: higher output