Free US delivery · duties paid · 14-day returns

IP44 or IP65: choosing protection for the location

Choose IP44 for its stated small-object and splash protection, or IP65 for dust-tight and water-jet protection, according to the intended location. For a bathroom or outdoor installation, match the complete fitting and its instructions to the actual position with the installer.

By LIRRA · Updated

Desk research using the frozen catalogue and the attributed source extracts; no hands-on testing.

Read the solids and water protection separately

Read an IP code as separate information about solids and water protection. The linked enclosure testing guide describes the categories in the table. Use the appropriate category for the exposure at the intended position, then choose the complete light using its installation instructions.

IP44 pairs a solids digit of 4 with a water digit of 4. IP65 pairs a solids digit of 6 with a water digit of 5. When a requirement is written IPX4, the X leaves the solids digit unspecified in that requirement. Read the water category directly instead of deciding by whichever complete code looks numerically larger.

Identify the complete fitting, its permitted mounting orientation and its intended location. Include a separate power supply, junction or connector in the installation plan. Choose the equipment as a complete arrangement for the wall, ceiling or garden position where it will be used, with each part fitted according to its instructions.

Read the solids and water protection separately
Part of code Digit or category Meaning relevant to this comparison
First: solids 4 Objects greater than 1 mm
First: solids 6 Dust tight
Second: water 4 Splashing water
Second: water 5 Water jets
Second: water IPX7 Temporary immersion
Remaining 1 rows
Read the solids and water protection separately
Part of code Digit or category Meaning relevant to this comparison
Unspecified position X Read the specified digit without assuming the other category

Browse by the marking and intended location

Our main range includes 414 models offering IP44-marked versions and 1545 offering IP65-marked versions. The small-light range includes 33 and 53 respectively. Use the marking as part of a shortlist, then choose the electrical version and location described by the maker.

Start with the actual exposure. A sheltered wall, a position near ground level and an area cleaned with water jets have different installation questions. Write down the proposed mounting surface, orientation and route for power before choosing the decorative shape. Keep the manufacturer's complete fitting reference with that location note.

When a design comes in several versions, retain the selected version's protection marking with its instructions. Include the parts needed to connect and support it, and leave access for maintenance. For a new bathroom arrangement, choose the position together with the installer before buying a fitting for it. For a garden display, plan the control and power connection as carefully as the light body itself.

Choose the bathroom position first

The IET's bathroom guidance refers to the wiring requirements for locations containing a bath or shower. Have the electrician apply those requirements to the actual room and the proposed equipment. Use the table as a starting illustration for a conventional bath or tray arrangement.

The linked bathroom zone guide illustrates conventional bath and tray geometry. Give the electrician the actual layout, including partitions, ceiling height and shower outlet. A shower without a tray needs its own assessment. Keep the room dimensions and fitting reference together when planning the installation.

Use the relevant position page for a ceiling light over the bath, a wall light over the bath or a ceiling light near the bath. Choose the light with the installer using that position and the maker's instructions.

Choose the bathroom position first
Conventional bath or tray location Public-guide geometry Water-protection starting point
Zone 0 Inside the bath or tray IPX7; additional electrical restrictions apply
Zone 1 Above bath or tray to 2.25 m from floor IPX4; IPX5 where jets are present
Zone 2 A further 0.6 m horizontally, to 2.25 m high IPX4; IPX5 where jets are present

Plan the whole bathroom installation

Give the electrician the fitting position and product instructions together. Include the complete assembly, electrical arrangement and permitted mounting orientation. Plan the support, supply and access before choosing a decorative finish. Keep the chosen product reference with the installation information for later maintenance.

For a low ceiling, use the low-ceiling over-bath page and include the actual ceiling height in the plan. A mirror above a basin has its own wall-position page. Describe the basin, bath, shower and proposed fitting positions clearly so the room can be assessed as it is.

For a site cleaned with jets, use the water-jet ceiling check or its matching wall guidance. Describe the cleaning method as well as normal daily use. Include the direction of exposure and the manufacturer's intended orientation when discussing the complete fitting.

Plan the garden position and power route

Describe whether the light will be sheltered under an overhang, exposed on a wall, close to soil or beside a washed-down surface. Choose an outdoor fitting for that exposure and use the maker's installation method. Include the support and access needed to care for it when plants or furniture are in place.

Plan the power supply, junction and cable entry alongside the body of the light. Keep connections accessible in the arrangement described by the maker. Choose a route clear of normal garden movement and allow access around the fitting for installation and maintenance. Retain the instructions with the selected product reference.

For a solar light, also plan the panel's daytime sky view. Compare the winter position with shadows from fences, roofs and growing plants. Use the linked winter guide for daylight comparisons and choose a dependable primary lighting plan for entrances and steps. A decorative solar display can be added around that practical plan.

For a light placed among pots, leave a practical route to its controls and any separate equipment after the plants have grown. For a wall fitting, consider the working space around doors, furniture and garden tools. Include those details in the location brief so the chosen body and support can be used as intended through the normal garden routine.

Compare the complete fitting before its finish

Choose the location, electrical version and mounting orientation together. Keep the full assembly in the comparison, including separate supply equipment. Discuss installation with the electrician before ordering a bathroom light. For an outdoor light, include the exposed surfaces and the route to its controls or power unit.

The linked models provide fittings to browse by their stated enclosure markings. Choose the one whose instructions match your intended location and support. Compare the complete dimensions, including parts that project from the wall or ceiling, and leave the access required for cleaning and maintenance.

Our splash-protection glossary, jet-protection glossary and water-category glossary give short definitions. Follow the position-specific pages for the arrangement you are planning. Keep those location notes beside the selected light's instructions so the same arrangement is used during installation.

Prepare a clear installation brief

Send the installer a plan or clear description of the position, nearby bath or shower, mounting surface and proposed fitting reference. Include cleaning exposure and any separate equipment. Check the selected version's complete marking and installation instructions on the product page before ordering.

Keep the product and installation instructions with the household maintenance information. Include the chosen version, any separate supply equipment and how the fitting is accessed. For a garden arrangement, leave room around plants and ornaments so maintenance follows the intended method after the display has been completed.

For a ceiling position beyond the bath and shower areas, use the outside-zones page and describe the actual room conditions. Complete the location decision with the installer, then choose the size, appearance and controls that work with it. Save the fitting reference for any later replacement.

Take photographs showing the proposed position in context as well as close views of the mounting surface. Include the route for power and the space around any separate equipment. Keep the installer’s agreed arrangement with the product instructions. That gives you a useful reference when cleaning, replacing or rearranging the light later.

Questions and answers

What is the difference between the protection markings?

The splash category describes protection from splashing water; the jet category describes protection from water jets. Read the solids category separately.

How should I choose a bathroom fitting?

Choose the actual position and complete fitting with the electrician, using the manufacturer's installation instructions.

What does the X mean in an IP code?

It leaves that position unspecified; read the protection stated by the other position.

What should I send to the installer?

The room layout, fitting position, mounting surface, complete product reference and instructions.

What should I include for an outdoor light?

The exposure, support, power route, connections and access for maintenance.

What else should I plan for a solar light?

The panel's daytime sky view and a dependable primary lighting arrangement for essential entrances or steps.

Travertine Waterproof Wall Light | IP65 Outdoor | CL85522SD
Travertine Waterproof Wall Light | IP65 Outdoor | CL85522SD — catalogue example, not a test result.

Evidence and method

Exact variant IP markings counted once per distinct work_id/code using tools/article_stats.py; no LIRRA certification; bathroom requirements attributed to IET and conventional geometry to the linked bathroom installation guide, with links to existing position pages.

  • Testing laboratory guide: enclosure protection categories
  • IET public FAQ: bathroom minimum water protection
  • Bathroom installation guide: conventional zone geometry
  • BEAMA Guide to IP Codes: temporary immersion category