Under-Cabinet Light Bar Length: Match the Bar to the Cabinet Run
Measure the cabinet run from end to end in centimetres and choose the under-cabinet light bar length that matches that span, so the light covers the whole worktop without projecting past the cabinet. Where the run does not land on a listed length, decide from the shape of the run which neighbouring size keeps the bar tidy and the light even.
By LIRRA · Updated
Catalogue desk research; selection is based on documented features and the stated household task. No hands-on testing.
Measure the cabinet run before you compare bars
Start with a tape measure along the underside of the run, from end to end, and record the figure in centimetres because that is how bar lengths are listed. Note anything that breaks up the run, such as a hob housing, a tiled upstand or a wall return, as these change the length you actually need to cover.
Measure the usable span rather than the visible front edge, and check that the space under the cabinet is clear at either end of the run. A clear run lets a bar sit along the whole length, while an obstruction means the bar has to stop short of the corner.
Match the measurement to a listed bar length
Bar lengths come as fixed sizes rather than being cut to order, so the length you choose is the length you get. Compare your measurement with the sizes listed: one range covers 10–50 cm options for tighter runs, while another is set out in 20–120 cm options for wider spans.
Pick the length that matches your measurement as closely as the list allows. A bar that lines up with the run spreads the light evenly over the worktop and sits neatly under the cabinet line.
When the run falls between sizes
If the measurement sits between neighbouring sizes, the shape of the run decides which way to go. Keep the bar within the cabinet line where the run meets a wall or a corner, because an overhanging bar looks untidy and throws light past the cabinet front; take the longer size where the run ends in mid-air and you want the light to reach the full front edge.
A wide run can also be covered by a long bar rather than several shorter bars joined end to end. A bar listed at "120 cm" with a "3000 mAh" built-in battery is made for that kind of span.
Pair length with mounting and power
Length only helps if the bar can sit where you need it, so check mounting at the same time as you check the size. Some strips are magnetic and run from an internal battery, while others are battery powered, including a model that takes "four AA batteries". Check how the bar is recharged before you fix the fitting rather than assuming it lifts down from its mount.
For a small run inside a wardrobe cabinet or a narrow cupboard, a compact bar is easier to place than a long strip. A slim body listed at "19 × 3 × 1.5 cm" works where the run is narrow, while a size such as "35 cm" fits snugly in a wardrobe cabinet.
Check the beam spread as well as the length
The beam angle decides how far the light travels down and forward onto the worktop, so the length of the bar is only half of the picture. A bar listed with a "120°" beam angle throws light wide across the surface, which suits a deep worktop where the run sits high above it.
Where the run is long and shallow, the length carries the light along the wall while the beam angle fills the depth. Reading length and beam angle together keeps the worktop lit evenly from end to end.
Questions and answers
How do I measure the cabinet run for an under-cabinet light bar?
Run a tape measure along the underside of the cabinet from end to end and record the figure in centimetres, taking note of any hob housing or wall return that shortens the usable span.
Does the light bar have to match the cabinet run exactly?
Match it as closely as the listed sizes allow, because a bar that lines up with the run spreads light evenly, while a bar that projects past the cabinet throws light beyond the worktop and looks out of place.
What should I do if my run falls between two lengths?
Look at where the run stops: keep the bar within the cabinet line where the run meets a wall or a corner, and take the longer size where you want light right to the front edge.
Can I cut an under-cabinet light bar to fit?
Bar lengths are sold as fixed sizes, so work from your measurement and choose from the lengths listed rather than planning to trim the fitting.
Does the length affect how the bar is powered?
Power depends on the design rather than the length: options include battery models that take "four AA batteries" and long strips with an internal battery, so check the power detail alongside the size.
Can a long bar cover a wide run?
Yes — long bars exist for wide spans. A bar listed at "120 cm" with a "3000 mAh" built-in battery covers a wide run without joining shorter bars together.
Does the beam angle matter as much as the length?
Yes. The beam angle decides how far the light travels onto the worktop, so pair the length with a beam angle that suits the depth of your worktop, such as a bar listed with a "120°" beam angle that throws light wide across the surface.
What length works inside a wardrobe cabinet or a small cupboard?
Choose a compact bar that fits the span you measured. A size such as "35 cm" sits neatly in a wardrobe cabinet, and a slim body listed at "19 × 3 × 1.5 cm" works where the run is narrow.
Catalogue examples
Under Cabinet Lighting — Sensor Bar, Warm or White$24.99
Under Cabinet Lighting — Slim White or Yellow Bar$19.99–$24.99
Under Cabinet Lighting — Adhesive, Black or White$19.99–$24.99
Under Cabinet Lighting — Adhesive Mount, Motion Sensor$19.99
Under Cabinet Lighting — Removable Battery, Dimmable$29.99
Under Cabinet Lighting — Magnetic Bar, Motion Sensor$19.99–$24.99
Evidence and method
Quoted fields on the live product cards for the listed products.
- Under Cabinet Lighting — Sensor Bar, Warm or White
- Under Cabinet Lighting — Slim White or Yellow Bar
- Under Cabinet Lighting — Adhesive, Black or White
- Under Cabinet Lighting — Adhesive Mount, Motion Sensor
- Under Cabinet Lighting — Removable Battery, Dimmable
- Under Cabinet Lighting — Magnetic Bar, Motion Sensor